[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

[SterkeJerke]

First one

Thankx.... Basic stuff working....

Code: Select all

root@Debian:~# nmap -p 1-4000 192.168.1.143

Starting Nmap 6.00 ( http://nmap.org ) at 2017-01-26 20:51 CET
Nmap scan report for 192.168.1.143
Host is up (0.12s latency).
Not shown: 3993 closed ports
PORT     STATE SERVICE
21/tcp   open  ftp
22/tcp   open  ssh
23/tcp   open  telnet
33/tcp   open  dsp
1080/tcp open  socks
3023/tcp open  magicnotes
3123/tcp open  unknown
MAC Address: 90:F1:AA:29:E6:D4 (Unknown)

Nmap done: 1 IP address (1 host up) scanned in 4.21 seconds

[sectroyer]

Hello, tv UE40H6230AK problem with Root as the user dcsmc after shutdown does not work root.

Rename data_0x16.zip to data.zip and re-root

PS: Someone rooted GFP9DEUC by Skype - I tried but not working

Downgrade and re-try

[m0thman]

Hello. I've tried to root my UE55HU8500TXRU FW Version T-GFP8DEUC-2290.2 (downloaded from this forum and downgraded by zero firmware) today, but seems like something goes wrong.

bill - 1 (1).jpg

Service menuShow

tv - 1.jpg

Here are other files:

insmod_qca.shShow

Code: Select all

echo " insmod_qca.sh begin"
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x16
echo " insmod_qca.sh end"

network_type_info.txtShow

Code: Select all

CurrentType=1

wifi_vendor.txtShow

Code: Select all

2%

vermagic.txt where not createt. sam.log also.

What I'm doing wrong?

[umajeric]

Hello. I've tried to root my UE50H6200 (T-MST14DEUC-2781.0 / T-MST14DEUS-1008) today, but seems like something went wrong.



I am missing

Code: Select all

network_type_info.txt

file.

wifi_vendor.txtShow

2

insmod_qca.shShow

echo " insmod_qca.sh begin"
echo 1 > /dtv/NET_OK
/bin/sh /mtd_rwarea/network/runSamyGO.sh &
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x37
echo " insmod_qca.sh end"

SamyGO/vermagic.txtShow

0135, product SMP preempt mod_unload ARMv7

SamyGO/sam.logShow

+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
+ [ 0 -ne 0 ]
+ /bin/dmesg
+ /bin/busybox grep anty
[antysfd] loaded
[antysfd] security_ops: 0xc0373130
[antysfd] sfd_mmap_file_hook: 0xbe661884
[antysfd] close: 0xc00b83f4
[antysfd] open: 0xbe660cb8
[antysfd] Starting sfd_uep_check_elf_file search at: 0xbe660cb8
[antysfd] found DMB SY at: 0xbe6617d8
[antysfd] branch sfd_uep_check_elf_file: 0xbe6617f0
[antysfd] sfd_uep_check_elf_file: 0xbe657384
[antysfd] Patching sfd.ko successful!!!
antysfd mod ld
+ chmod +x /tmp/ntkfree
+ mknod /dtv/ntkaxis c 140 0
+ /tmp/ntkfree
open failed
+ cp /dtv/usb/sda1/SamyGO/samyGOso /tmp/
cp: can't stat '/dtv/usb/sda1/SamyGO/samyGOso': No such file or directory
+ cp /dtv/usb/sda1/SamyGO/libNetSwitch.so /tmp/
cp: can't stat '/dtv/usb/sda1/SamyGO/libNetSwitch.so': No such file or directory
+ chmod +x /tmp/samyGOso
chmod: /tmp/samyGOso: No such file or directory
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ /bin/sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/
+ chmod +x /dtv/samygo_telnetd
+ cp+ /dtv/usb/sda1/SamyGO/busybox /tmp/bin/
/dtv/samygo_telnetd 33
Starting simple telnet server
Socket created
bind done
Waiting for incoming connections...
+ chmod +x /tmp/bin/busybox
+ /tmp/bin/busybox --install -s /tmp/bin
+ sync
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
tcpsvd: listening on 0.0.0.0:21, starting
+ ln -s /dev/loop3 /tmp/loopnone
+ sync
+ [ -e /dtv/usb/sda1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
+ /tmp/bin/busybox --install -s /mnt/bin
+ sync
+ rm /mnt/sam.log
+ ls -la /mnt/bin /mnt/doc /mnt/etc /mnt/firmware /mnt/lib /mnt/lost+found /mnt/mc /mnt/opt /mnt/rcSGO /mnt/samygo.log /mnt/sbin /mnt/src /mnt/usr /mnt/var
+ echo ===========================
+ echo Starting rcSGO from run1.sh
+ echo ===========================
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt

patch.sh.outputShow

ip-192-168-1-5:SamyGO uros$ ./patch.sh
Found vermagic at: 1338
43+0 records in
43+0 records out
43 bytes transferred in 0.000053 secs (812410 bytes/sec)
1+0 records in
1+0 records out
1 bytes transferred in 0.000012 secs (82241 bytes/sec)

I can telnet to the TV, but I get:

telnetShow

ip-192-168-1-5:SamyGO uros$ telnet 192.168.1.110 3123
Trying 192.168.1.110...
Connected to samsung-tv.
Escape character is '^]'.
/bin/sh: can't access tty; job control turned off
/dtv #

What am I missing?

Thanks for help.

[zoelechat]

Nothing. TV rooted

[umajeric]

OK, but why I cannot ssh into it?

[umajeric]

Cancel that - got it - thank you all

Root working on UE50H6200 (T-MST14DEUC-2781.0 / T-MST14DEUS-1008)

[m0thman]

Ok, I've downgraded my UE55HU8500TXRU to FW to version T-GFP8DEUC 2270.3
Now it's better, but still does not work.
I've tried to do that with and without 2nd timeshift flash.
Watchdog is disabled.

Here are my files:

Install screenshotShow

tv - 1 (1).jpg

insmod_qca.shShow

Code: Select all

echo " insmod_qca.sh begin"
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x16
echo " insmod_qca.sh end"%

network_type_info.txtShow

Code: Select all

CurrentType=1

vermagic.txtShow

Code: Select all

0178, product SMP preempt mod_unload ARMv7 p2v8

wifi_vendor.txtShow

Code: Select all

2%

patch.sh.logShow

Code: Select all

Found vermagic at: 1338
48+0 records in
48+0 records out
48 bytes transferred in 0.000075 secs (639132 bytes/sec)
1+0 records in
1+0 records out
1 bytes transferred in 0.000030 secs (33554 bytes/sec)

sam.log before patchShow

Code: Select all

+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
+ [ 8 -ne 0 ]
+ /bin/dmesg
+ /bin/grep antysfd
+ /bin/busybox tail -n 1
+ /bin/busybox cut -d ' -f 4
+ good_vermagic=0178, product SMP preempt mod_unload ARMv7 p2v8
+ echo good vermagic='0178, product SMP preempt mod_unload ARMv7 p2v8 '
good vermagic='0178, product SMP preempt mod_unload ARMv7 p2v8 '
+ echo 0178, product SMP preempt mod_unload ARMv7 p2v8
+ /bin/dmesg
+ /bin/busybox grep anty
antysfd: version magic '0177, product SMP preempt mod_unload ARMv7 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' should be '0178, product SMP preempt mod_unload ARMv7 p2v8 '
+ chmod +x /tmp/ntkfree
Terminated
+ mknod /dtv/ntkaxis c 140 0
Terminated
+ /tmp/ntkfree
Terminated
+ cp /dtv/usb/sda1/SamyGO/samyGOso /tmp/
Terminated
+ cp /dtv/usb/sda1/SamyGO/libNetSwitch.so /tmp/
Terminated
+ chmod +x /tmp/samyGOso
Terminated
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ /bin/sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
Terminated
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
Terminated
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/
Terminated
+ chmod +x /dtv/samygo_telnetd
Terminated
+ cp /dtv/usb/sda1/SamyGO/busybox /tmp/bin/
+ /dtv/samygo_telnetd 33
/dtv/usb/sda1/SamyGO/run1.sh: line 22: /dtv/samygo_telnetd: not found
Terminated
+ chmod +x /tmp/bin/busybox
Terminated
+ /tmp/bin/busybox --install -s /tmp/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 27: /tmp/bin/busybox: not found
+ sync
Terminated
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
Terminated
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
/dtv/usb/sda1/SamyGO/run1.sh: line 32: /tmp/bin/busybox: not found
Terminated
+ ln -s /dev/loop3 /tmp/loopnone
Terminated
+ sync
Terminated
+ [ -e /dtv/usb/sda1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox --install -s /mnt/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 45: /tmp/bin/busybox: not found
+ sync
Terminated
+ rm /mnt/sam.log
Terminated
/dtv/usb/sda1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system
+ ls -la /mnt/*
/dtv/usb/sda1/SamyGO/run1.sh: line 49: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 50: can't create /mnt/sam.log: Read-only file system
+ echo Starting rcSGO from run1.sh
/dtv/usb/sda1/SamyGO/run1.sh: line 51: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 52: can't create /mnt/sam.log: Read-only file system
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt

sam.logShow

Code: Select all

+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
+ [ 8 -ne 0 ]
+ /bin/dmesg
+ /bin/grep antysfd
+ /bin/busybox tail -n 1
+ /bin/busybox cut -d ' -f 4
+ good_vermagic=0178, product SMP preempt mod_unload ARMv7 p2v8
+ echo good vermagic='0178, product SMP preempt mod_unload ARMv7 p2v8 '
good vermagic='0178, product SMP preempt mod_unload ARMv7 p2v8 '
+ echo 0178, product SMP preempt mod_unload ARMv7 p2v8
+ /bin/dmesg
+ /bin/busybox grep anty
antysfd: version magic '0177, product SMP preempt mod_unload ARMv7 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' should be '0178, product SMP preempt mod_unload ARMv7 p2v8 '
+ chmod +x /tmp/ntkfree
Terminated
+ mknod /dtv/ntkaxis c 140 0
Terminated
+ /tmp/ntkfree
Terminated
+ cp /dtv/usb/sda1/SamyGO/samyGOso /tmp/
Terminated
+ cp /dtv/usb/sda1/SamyGO/libNetSwitch.so /tmp/
Terminated
+ chmod +x /tmp/samyGOso
Terminated
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ /bin/sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
Terminated
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
Terminated
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/
Terminated
+ chmod +x /dtv/samygo_telnetd
Terminated
+ cp /dtv/usb/sda1/SamyGO/busybox /tmp/bin/
+ /dtv/samygo_telnetd 33
/dtv/usb/sda1/SamyGO/run1.sh: line 22: /dtv/samygo_telnetd: not found
Terminated
+ chmod +x /tmp/bin/busybox
Terminated
+ /tmp/bin/busybox --install -s /tmp/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 27: /tmp/bin/busybox: not found
+ sync
Terminated
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
Terminated
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
/dtv/usb/sda1/SamyGO/run1.sh: line 32: /tmp/bin/busybox: not found
Terminated
+ ln -s /dev/loop3 /tmp/loopnone
Terminated
+ sync
Terminated
+ [ -e /dtv/usb/sda1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox --install -s /mnt/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 45: /tmp/bin/busybox: not found
+ sync
Terminated
+ rm /mnt/sam.log
Terminated
/dtv/usb/sda1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system
+ ls -la /mnt/*
/dtv/usb/sda1/SamyGO/run1.sh: line 49: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 50: can't create /mnt/sam.log: Read-only file system
+ echo Starting rcSGO from run1.sh
/dtv/usb/sda1/SamyGO/run1.sh: line 51: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 52: can't create /mnt/sam.log: Read-only file system
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt

Same for T-GFP8DEUC 2240.3

[m0thman]

And there is some more questions:

When updating firmware does it removes all changes made by SamyGO installer in these 2 cases:
1) Flashing 0000 firmware and then flashing some newer version.
2) Flashing some version that is newer then currently installed.

Just interested how to start install process "from scratch".
And wondering will I be able to fully remove SamyGO if I will need that.

[dar3k]

Ok, I've downgraded my UE55HU8500TXRU to FW to version T-GFP8DEUC 2270.3
Now it's better, but still does not work.
I've tried to do that with and without 2nd timeshift flash.
Watchdog is disabled.

Check your pendrive, at first redownload samyext4.img because you have problem with that file:
"/dtv/usb/sda1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system"
Check also that file on your USB stick /SamyGO/busybox