d6200 change to d6100

[aela111]

I try it but nothing happened
I allergy say the app just blinking
and don't open I think its something in the service menu

[Quattro1]

Allright
Today I changed TV name D6100 to D6500. Setting are to my local country. A lot of stuff changed in the normal TV menu.
In Smart Hub menu, there is Web browser and Skype and tons on good stuff too :O A lot of apps
But with web browser, there is problem. When I turn it on, it says in small screen "Connection" and now it has connected almost 20 min. Nothing.
Is there somekind of glitch?
I read the tech specs between D6100 and D6500. D6500 has built in web browser ans skype and thats it-everything else is same

And when I turn on 2D to 3D mode- the tv screens goes green, but sound gome throuh. yeah, I will don't touch this 3D convert anymore.

Maybe the soft update 1004 to 1009 helps? Or there is something special missing? Like this setting- TOOLS SUPPORT value?

[julianbb]

Did anyone notice that D6100 use firmware GAS6DEUC @ 86.26 MB AND D6500 use firmware GASDEUC @ 109.63 MB ?
So i presume either d6100 missing a chip for graphics (2d>3d and also web browser have full FLASH support) or the difference of 25 mb in firmware contain software support for extra functions...
Easy to see if owners of D6100 and D6500 will connect with Exlink cable copy the Debug log and share here...

[aela111]

look in my photo its after I change my d6200

[julianbb]

aela, i'm talking about debug log like this :

Code: Select all

 =========================
onboot Firenze (Feb 11 2011 - 21:07:15)
release ver : 0050
ETC         : 
=====================================
loading kernel part 2 : 512Byte + XX byte
Secure boot for kernel: success: 3540624-1611.[SELP] preset_lpj manual setting 1196032

Revision number : 1 

prefetch=0x71800000

[sdp_mmch_isr] DTO Interrupt not caused!!!!

================================================================================

 SAMSUNG Firenze Kernel

 Version : 1007_275 RELEASE

================================================================================


init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 13:05:58 KST)

starting pid 32, tty '/dev/ttyS1': '/etc/rc.local'
/etc/rc.local start!!!!
##### send signal from USER, SIG : 0, init(1)->???(32) sys_kill


starting pid 41, tty '/dev/ttyS1': '-/bin/sh'
/etc/profile start!! 
Fri Jan  1 00:00:00 UTC 2010
=====================================================================
  ROOTFS VERSION : "Firenze 1006" KERNEL MODULE VERSION : "1006_274"
=====================================================================
-/bin/sh: can't create /proc/fs/readahead/sr0: nonexistent directory
Flash is eMMC
/etc/profile for EMMC !!
====================================================================

[SELP] rfs_glue module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] rfs_fat module load!!(1006_274 RELEASE preempt mod_unload ARMv7 )

====================================================================

mount mtd_rwarea
rm: cannot stat '/mtd_rwarea/PartitionSwitch*': Invalid argument
2st partition!!
mount mtd_exe 2nd partition!!!
====================================================================

[SELP] samdrv module load!!(1007_275 RELEASE preempt mod_unload ARMv7 )

====================================================================

Application is started..
/mtd_exe/rc.local start!!!!
insmod: can't insert '/mtd_exe/samdrv.ko': File exists
Upgrade is not found.. Normal Booting
====================================================================

[SELP] fpi module load!!(1007_275 RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] fast_start_pm module load!!(1007_275 RELEASE preempt mod_unload ARMv7 )

====================================================================

send alive message
mount mtd_rwcommon
rm: cannot stat '/mtd_rwarea/Coredump*': Invalid argument
kernel.msgmni = 64
^^ : mallopt (M_MMAP_THRESHOLD, 4096) is called successfully.....
##### System Execution!!! #####


 Call.. CFastBoot() 

i2c 5 device not exist
i2c 5 device not exist
EEPROM use BUS_1.....
TDaRecorder 1 Building...
TDaRecorder 2 Building...
Get t_SetMicomSystemStatus ACK! 16 
############## Find Factory_Part1.dat File in mtd_exe ##################
############## Find Factory_Part2.dat File in mtd_exe ##################

		FixedId : Nvram[6] vs File[6] 

		WBId : Nvram[2] vs File[2]

		WB ADC(Part1) Id : Nvram[1] vs File[1]

		EER Basic Id : Nvram[18] vs File[18]

		EERId Custom : Nvram[4] vs File[4]

		FACId : Nvram[5] vs File[5]
t_GetDiffMicomClock 1:0
MICOM_POWER_ON_STATUS
[Boot Status 2] NORMAL POWER ON
[Boot Status 16] BOOT_TYPE_NORMAL_ON
API_DeviceInit
*******************************************
chiprev : 1
Part : 73
Rom ID : 7
Major : 4
Minor : 0
*******************************************
[Tuner Init]1. Firmware Time:2640
== Update Load Firmware ROM 7==

~~[Sub System Error] WindowCreatorODExt.cpp:NewPixelShiftControl():60 OD Product does NOT Support PixelShiftControl


~~[Sub System Error] WindowCreatorODExt.cpp:NewDPMSMon():67 OD Product does NOT Support DPMSMon


~~[Sub System Error] WindowCreatorODExt.cpp:NewScartTypeMon():81 OD Product does NOT Support ScartTypeMonitor


~~[Sub System Error] ScreenCreatorODExt.cpp:NewAgingPatternMonitor():39 OD Product does NOT Support PCControl

Data Transferred to Store...[384]!!!
Data Transferred to ScreenObject...[384]!!

you need a Exlink cable from Tv to Pc. Look here : http://wiki.samygo.tv/index.php5/Ex-Lin ... r_C-Series

[aela111]

Yes I know what do you mean
I just upload this you can see my firmware is not the same
Is it really meter?
As you say we need some one that all ready have the app built in

[julianbb]

Exactly,
Or if someone can look into the both firmware GASDEUC and GAS6DEUC and see if they request same hardware...

[Quattro1]

Did anyone notice that D6100 use firmware GAS6DEUC @ 86.26 MB AND D6500 use firmware GASDEUC @ 109.63 MB ?

I started to think....
I ask smarter people if this kind of firmware update is possible ? :
Is it possible, that I upgrade my D6100 ( tv model name IS CHANGED to D6500) firmware (GAS6DEUC 1004),
to D6500 firmware GASDEUC 1012.2 @ 109.63 MB from official website? (to usb and then install from usb)?
If soft is enable to make the install? Or there is somekind of error? Or it could brick the tv?
Is it possible or not?