Enable Serial Input over Ex-Link cable doesn't work

rubinho76 · Post by **rubinho76** » Thu Oct 20, 2011 10:46 am

Hello,

i have built with this converter an ex-link cable.
The Serial-Output works fine, but the serial input is not working.
The code 10041004 + Enter was ignored
what am I doing wrong ?

My TY is a UE46D7090

thx
Rubinho

Post by **juusso** » Thu Oct 20, 2011 11:03 am

23331003
20089999

rubinho76 · Post by **rubinho76** » Fri Oct 21, 2011 4:59 pm

It works !

thx

Post by **ocean** » Mon Feb 20, 2012 12:58 pm

hi everybody.
I also purchased the modul rubinho76 has written about earlier in this post. My question now is how to connect a vga-cable with this part.
I found this in wiki:

Pin 4 at the VGA connector is RX (from the TV's point of view)
Pin 11 at the VGA connector is TX (from the TV's point of view)

till here it's clear to me, but do I really have to connect all the other pins to ground like told in wiki:

Pin 5,6,7,8 and the case at the VGA connector are GND

Best regards and thanks for help

Post by **juusso** » Mon Feb 20, 2012 1:51 pm

i personally use pin5 for GND.

Post by **ocean** » Mon Feb 20, 2012 2:49 pm

so it's up to me which pin I choose of 5,6,7,8 or case.
Thanks for the fast answear juuso

SamyGO

Enable Serial Input over Ex-Link cable doesn't work

Enable Serial Input over Ex-Link cable doesn't work

Re: Enable Serial Input over Ex-Link cable doesn't work

Re: Enable Serial Input over Ex-Link cable doesn't work

Re: Enable Serial Input over Ex-Link cable doesn't work

Re: Enable Serial Input over Ex-Link cable doesn't work

Re: Enable Serial Input over Ex-Link cable doesn't work