Bricked UN46C6500
Bricked UN46C6500
I have patched firmware firmware 1032 that run samygo when tv start. It worked fine for a week and now i have a blank screen and the light flashes 6 times. Have a 3.5 mm jack on back of tv labeled ex-link. Have a ftdi ex-link cable but i dont get any output from tv. already swapped rx and tx as said in wiki and also pluged wires into the vga port and still nothing. also performed loopbak test to cofirm cable working. usb ports seem dead. any sugesstions.
Re: Bricked UN46C6500
why it become bricked? did you do something in console or in service menu? here is no reason to brick because just of patched firmwares.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Bricked UN46C6500
Did not do anything in console or in service menu.
Last edited by rome1931 on Sun Jan 06, 2013 7:07 am, edited 2 times in total.
Re: Bricked UN46C6500
juuso wrote:why it become bricked? did you do something in console or in service menu? here is no reason to brick because just of patched firmwares.
Did not do anything in console or in service menu. Plug in usb with samygo on it and tv went off and came back on and went black.
I attached my last samy log.
You do not have the required permissions to view the files attached to this post.
Re: Bricked UN46C6500
Weird, wird, weird brick. If you haven`t set rs232 to debug in service menu to switch ExLink to debug mode, then no log nor access trough Exlink. Logs show about nothing, but red led flashes like kernel or rootfs became damaged. If i`m right and kernel or rootfs wont load, then no chance for repair. Let`s wait for other user opinions...
Repair possible by mainboard replace. Be prepared to search for second hand mainboard for your TV.
Repair possible by mainboard replace. Be prepared to search for second hand mainboard for your TV.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Bricked UN46C6500
ok will do. I set it to debug and brought the best cable. Im waiting on a ca-42 and i will try that. will give results, should have monday.
-
beatfreak
- SamyGO Project Donor
- Posts: 597
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: Bricked UN46C6500
note that most c-series tvs have their ex-link connection included in vga port, headphone-jack was in b-series...
and which way the tv was hacked?
and which way the tv was hacked?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS // >> decommissioned due to tuner death
//UE46F8090 @ T-FXPDEUC 1136 // rooted by new Widget // root starting with empty usb drive
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
//UE46F8090 @ T-FXPDEUC 1136 // rooted by new Widget // root starting with empty usb drive
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.Re: Bricked UN46C6500
beatfreak wrote:note that most c-series tvs have their ex-link connection included in vga port, headphone-jack was in b-series...
and which way the tv was hacked?
I have a headphone jack that says ex-link. It was hacked with a patched firmware to run samygo on startup and i also installed hack widget.
Re: Bricked UN46C6500
what about hotplug? you could try to restore tv..., just need to make some script, called run.sh, place on fat32 formatted USB and attach it while TV is ON.
Needed to perform some tests to decide what`s wrong and how to treat.
Needed to perform some tests to decide what`s wrong and how to treat.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Bricked UN46C6500
juuso wrote:what about hotplug? you could try to restore tv..., just need to make some script, called run.sh, place on fat32 formatted USB and attach it while TV is ON.
Needed to perform some tests to decide what`s wrong and how to treat.
I just changed the main board.