samsung+telnet+xlink cable

Here is information about customize your B series firmware..:!:This forum is NOT FOR USER questions or problems but DEVELOPER.
Post Reply

User avatar
erdem_ua
SamyGO Admin
Posts: 3125
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: samsung+telnet+xlink cable

Post by erdem_ua »

You needed to read wiki pages, there is a detailed instructions...
User avatar
erdem_ua
SamyGO Admin
Posts: 3125
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: samsung+telnet+xlink cable

Post by erdem_ua »

Using via ExLink right? What is your firmware? If you have latest firmware, ExLink is disabled on those FWs...
User avatar
erdem_ua
SamyGO Admin
Posts: 3125
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: samsung+telnet+xlink cable

Post by erdem_ua »

You needed to connect your TV from ExLink connection with that firmware.
If you enabled debug mode and can't see anything, it means your setup is wrong or your ExLink cable not working.
Check your setup.

Post Reply

Return to “[B] Firmware”