SamyGO

My bet is on chip number "10" (4256BRP == ST M24256, 256Kbit I2C EEPROM). It has the right size (32KB), and it seems to be connected to the main SoC - or maybe not, picture quality is not good enough to be 100% sure. What are the labels on the four test pads nearby? Chip numbered "8&...

I confirm my previous post : chip #8 should be the one :) To be more confident, you can try to follow sda/scl (the 2 signals connected to via-holes close to the chip) : they should go to the SoC What's the crack on your SoC heatsink ? Hi Oga83, thank you I'll do that. the first photos (the one with...

ATMLH006 (number 8) is the best candidate to me (I2C eeprom, could be connected to SoC). S24C50 (number 1) could also be a good candidate (I2C eeprom), but its position is surprising to me (far from the SoC, and maybe connected to a tuner related chip). Could you take a higres photo of these area s...

S24CS0 is probably for micom... do not touch it More generally, do not shortcut any pins before being sure it is the config eeprom What are the refs of the other ones ? Hi guys. sorry it took me so long to post the references.. i was travelling for work but finally had a break.. here they are. thx!...

juuso wrote:What about yellow circled one?

didn't do anything.. nor the red one... I'll get all the references and post them later on..

oga83 wrote:Something like 24C512 or S24Cxxx

I've found one that says: S24CS0, i've tried to short the 5th and 6th pins but nothing happens.. all other 8 pin chips start with Z something...

oga83 wrote:The one on picture BN94-02757A-BOTTOM1_zps299203ed is not an eeprom (SDA and SCL would be grounded)
The other one could be, but I cannot read its reference to confirm

Ok.. I'll try to take clearer pictures of the chips and post them A.S.A.P., what's the reference that I'll should be looking for?

First of all thanks to all for your help, i will try all the solutions that you've given me and I'll be back to comment if i was successful... also here are some pictures of the other side of the main board there are two eight pin chips http://i1110.photobucket.com/albums/h447/Gotchinezcki/BN94-0275...

Hi guys, I changed in the service menu the model of my tv (UN46C7000) and now I can't do anything. It turns on and off by itself and I think the only solution is to reset the eeprom but I don't know where is it.. here are some pictures of the main board, hopefully someone can help me find it. http:/...