bago75 wrote:
1) Should I leave B6000 or can I switch to B7000 model type while doing this stuff?
If your TV is operating well, leave B7000. To have active network settings window, try enable wireless in service menu at first:
Code: Select all
control-sub option-network-----> set to wireless (from cable)
after this you should see active network settings window.
Yes, your kernel now supports network
Once I will have understood how to enable networking I can take step6 partII from merv07 guide in order to make everything automatic at power on.
Yes, to much manuals is confusing. Now you need startup scripts from merv07 to have samygo extensions working. If you do not get network setings over menu, you need do it from console (or with some scripts)
2) As I now run "T-CHL5DEUC-2008v24-auto-arfix2-decod.rar" from jusiz28 and I'm able to manually load the driver and bring up the rausb0 from serial console what should I do next to give it a chance to find my wireless network and to ask me the password to connect to it?
I think you should try insecure wifi at first and just after you get it working - use wep or wpa keys. Here were some posts how to set network from console.
Also I saw I used the modules from the "wifi extension addon 0.02" but the modules can also be found in the "SamyGO All Extensions": I think that if the module loads and I can see "rausb0" then it should be fine, but...
Use any module witch works on your TV. Do not investigate weel. Try any modules until you get it working. That`s all
4) As I can't find All Extensions for my TV can you confirm I can use "All Extensions" for T-CHL5DAUC even if I have a T-CHL5DEUC?
Yes, try it. Should work.