Problems with telnet enabler

[erdem_ua]

thats about 3001.1

[andbir]

so i tried it with several usb-sticks, but the doesn't find the update files and i can't update any more

Yes, you are a little bit fucked, you used the newest firmware from samsung (i think it says almost everywhere on this site DO NOT use the latest version).
with 3001.1 you can't run any SamyGo and you can't downgrade the bios either.

I think your only option now would be to get the exlink cable and stop the bootloader via the debugger... very much more complicated.

I hope someone here will be able to publish some wizard or instructions for all the people who bought TVs with the new firmware to downgrade, but it will not be easy since the new firmware was created specifically to prevent all the SamyGo hacks

Meanwhile, try to get an ex-link cable that you could connect to the com-port (of some old computer that still has a com-port, very unusual on newer computers)

good luck

[edelfalke]

I think ww is a CI Device, if so you can rollback your firmware like shown here http://forum.samygo.tv/viewtopic.php?f=2&t=457

[edelfalke]

in wiki you can find this http://wiki.samygo.tv/index.php?title=E ... 2B_Devices
Activating the serial console from Debug Menu

[juusso]

linux shell drop doesn`t work in fw 3000. Exlink isnt able to do that. No more
http://forum.samygo.tv/viewtopic.php?f=4&t=461