You should always use fresh samyext4.img and check md5!!! also with each usb try also attaching rec usb.fraglord wrote: I did try all my 8 usb sticks with the same result as above over and over - not work.
[Ended][ROOT] H "Skype" root (FW<=Dec.2014, all T-GFS)
Re: [!!!] Rooting H series
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [!!!] Rooting H series
Ok I will try again tomorrow. Is there any preference to which usb port to connect the usb stick to?
*** UE40H6470 *** F/W: T-MST14DEUC-2130.0 *** OTA & OTN disabled ***
Re: [!!!] Rooting H series
Obviously no(?), but maybe you should try the "recording device trick" exactly as it's described in first post (spoiler).fraglord wrote:Ok I will try again tomorrow. Is there any preference to which usb port to connect the usb stick to?
I do NOT receive any PM. Please use forum.
Re: [!!!] Rooting H series
Hi, excuse my English, I Czech.
I can not rooting for UE48H6400 firmware 2134, otn support off, procedure exactly as directed.
Telnet test from negative, log is not.
It's a new firmware or something else.
Thanks for responding.
I can not rooting for UE48H6400 firmware 2134, otn support off, procedure exactly as directed.
Telnet test from negative, log is not.
It's a new firmware or something else.
Thanks for responding.
You do not have the required permissions to view the files attached to this post.
Samsung Smart TV UE48H6400, VU+UNO, Qnap TS-112P
Re: [!!!] Rooting H series
look at your tv. you must press "EXIT" ant then restart your TV with "POWER" Button.tonis wrote:Hi, excuse my English, I Czech.
Telnet test from negative, log is not.
After that you must wait until you screen was flickering 4-5 times (automatic reboots...)!
after this reboots, you can test telnet with port 3123.
ps: works for me on a UE55H6470 without problems

Re: [!!!] Rooting H series
Yes I did it.
Press "EXIT" and restart TV with "POWER" Button.
Automatic reboots did not take place, I waited about 4 min. TV running normally but without skype.
Press "EXIT" and restart TV with "POWER" Button.
Automatic reboots did not take place, I waited about 4 min. TV running normally but without skype.
Samsung Smart TV UE48H6400, VU+UNO, Qnap TS-112P
Re: [!!!] Rooting H series
but do you get telnet on port 3123 ? Also your firmware version is VERY high. Did you disable OTN Support? Can anybody with this firmware confirm root?tonis wrote:Yes I did it.
Press "EXIT" and restart TV with "POWER" Button.
Automatic reboots did not take place, I waited about 4 min. TV running normally but without Skype.
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [!!!] Rooting H series
Also I think you didn't read this:tonis wrote:Yes I did it.
Press "EXIT" and restart TV with "POWER" Button.
Automatic reboots did not take place, I waited about 4 min. TV running normally but without Skype.
viewtopic.php?f=77&t=7996&hilit=warning+never
Not without a reason I did post it months ago

I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [!!!] Rooting H series
HI, i have an UE22H5610AYXZT with FW2130 OTN disabled, tried to root it
after that exit -> pwr off -> pwr on and TV start rebooting (3/4 times) when fixed tried to telnet on port 33 and 3123 without success.
I would like to try with the PWR on suggestion , but when i activate it from service men? and pwr off/on TV i get "not available" when try to rec and no format HD options in menu.
so checked in service menu and PVR is again off can someone help me.
Thanks in advance
after that exit -> pwr off -> pwr on and TV start rebooting (3/4 times) when fixed tried to telnet on port 33 and 3123 without success.
I would like to try with the PWR on suggestion , but when i activate it from service men? and pwr off/on TV i get "not available" when try to rec and no format HD options in menu.
so checked in service menu and PVR is again off can someone help me.
Thanks in advance
You do not have the required permissions to view the files attached to this post.
Model : UE22H5610AYXZT
Firmware : T-MST14DEUC-2130.0 / T-MST14DEUS-1008
Firmware : T-MST14DEUC-2130.0 / T-MST14DEUS-1008
Re: [!!!] Rooting H series
TV started rebooting means "root worked"Steveb2l8 wrote:HI, i have an UE22H5610AYXZT with FW2130 OTN disabled, tried to root it
after that exit -> pwr off -> pwr on and TV start rebooting (3/4 times) when fixed tried to telnet on port 33 and 3123 without success.


I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!