1. YOU take 8-pin chip high res photos. All 8-pin chips.
2. We look and tell you which one is correct
You have to find chip and make short circuit on it`s legs SDA to GND or SDL to GND. You do not need any holes. Check wiki more detail and you will understand the technique. Did you inspect ANY of these images on wiki? I guess no.
Main Board BN97-05375B EEPROM Reset Holes?
Re: Main Board BN97-05375B EEPROM Reset Holes?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Main Board BN97-05375B EEPROM Reset Holes?
KenO wrote:notengo13,
Thanks for the link to UE48H6640SLXXC some pictures viewtopic.php?f=76&t=10744

I'm beginner too, and learning every day something newAs you can tell I am a beginner but Want to Learn!!!
if somebody has an interest, any help is welcome.Can others help with your project?

look at your mainboard for IC904 ...... and maybe is similar to mine. I can't confimr exactly if this one is EEPROM, I found some info in service manuals and in spare pages manuals that for my TV this could be the EEPROM.Guess my tip about IC901 is EEPROM was wrong.
check here for your TV spares. you need to specify your version.
https://www.encompassparts.com/model/SM ... _720P_HDTV
maybe this can help youAny general suggestions where to find Samsung EEPROM chip?
SpoilerShow
Code: Select all
Part Number Description Location
1103-001310 Ic-eeprom;2kbit,256x8,soic,8z30,5x4mm,2. IC502_H2,IC503,IC112
1103-001506 Ic-eeprom;m24512-rmn6tp,512kbit,64kx8,so IC904_US
UE48H6640 T-MST14DEUC 2781.0 root latestH --> 2130.0 skypeRoot-->0000-->2115.3 "Skype refueled" Root
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
QE55QN93A - - >firmware T-NKM2DEUC-1805.4 (backup 1590.0) - - >update CURL60 Error --> CURL28 Error
Re: Main Board BN97-05375B EEPROM Reset Holes?
juusso,
"1. YOU take 8-pin chip high res photos. All 8-pin chips. 2. We look and tell you which one is correct...Check wiki more detail and you will understand the technique. Did you inspect ANY of these images on wiki? I guess no." Did, thought person who told me it was IC901 correct. Guess as a beginner must do homework.
notengo13,
"look at your mainboard for IC904" Thanks, did and it is left of IC901. Am attaching photo. This one has 24512RP
ST8211k
Thanks for encompassparts.com link!!! Checked and found on p3 1103-001506 Ic-eeprom;m24512-rmn6tp,512kbit,64kx8,so IC904_US
Am confident this is correct EEPROM!!!
Thanks again for your help!!!
Ken
"1. YOU take 8-pin chip high res photos. All 8-pin chips. 2. We look and tell you which one is correct...Check wiki more detail and you will understand the technique. Did you inspect ANY of these images on wiki? I guess no." Did, thought person who told me it was IC901 correct. Guess as a beginner must do homework.
notengo13,
"look at your mainboard for IC904" Thanks, did and it is left of IC901. Am attaching photo. This one has 24512RP
ST8211k
Thanks for encompassparts.com link!!! Checked and found on p3 1103-001506 Ic-eeprom;m24512-rmn6tp,512kbit,64kx8,so IC904_US
Am confident this is correct EEPROM!!!
Thanks again for your help!!!
Ken
You do not have the required permissions to view the files attached to this post.
Re: Main Board BN97-05375B EEPROM Reset Holes?
Did some searching and ST is STMicroelectronics http://www.st.com/content/st_com/en.html Checked website and used search with 24512RP EEPROM
and got http://www.st.com/content/st_com/en/sea ... #q=24512RP EEPROM-t=keywords-page=1
Products (358): 24512RP EEPROM
Part Number Status Description
CD21-rev3 Active Dual interface / Calypso revision 3.1 with 4,8 or 18KB EEPROM
L9805E Active Super smart power motor driver with 8-Bit MCU, RAM, EEPROM, ADC, WDG, Timers, PWM and H-bridge driver
M24C01-R Active 1 Kbit serial I2C bus EEPROM
M24C01-W NRND 1 Kbit serial I2C bus EEPROM
M24C02-A125 Active Automotive 2-Kbit serial I2C bus EEPROM
M24C02-DRE Active 2-Kbit serial I2C bus EEPROM 105?C operation
M24C02-F Active 2-Kbit serial I2C bus EEPROM
M24C02-R Active 2 Kbit serial I2C bus EEPROM
M24C02-W NRND 2 Kbit serial I2C bus EEPROM
M24C04-A125 Active Automotive 4-Kbit serial I2C bus EEPROM
but no 24512RP?
What did I do wrong?
Ken
and got http://www.st.com/content/st_com/en/sea ... #q=24512RP EEPROM-t=keywords-page=1
Products (358): 24512RP EEPROM
Part Number Status Description
CD21-rev3 Active Dual interface / Calypso revision 3.1 with 4,8 or 18KB EEPROM
L9805E Active Super smart power motor driver with 8-Bit MCU, RAM, EEPROM, ADC, WDG, Timers, PWM and H-bridge driver
M24C01-R Active 1 Kbit serial I2C bus EEPROM
M24C01-W NRND 1 Kbit serial I2C bus EEPROM
M24C02-A125 Active Automotive 2-Kbit serial I2C bus EEPROM
M24C02-DRE Active 2-Kbit serial I2C bus EEPROM 105?C operation
M24C02-F Active 2-Kbit serial I2C bus EEPROM
M24C02-R Active 2 Kbit serial I2C bus EEPROM
M24C02-W NRND 2 Kbit serial I2C bus EEPROM
M24C04-A125 Active Automotive 4-Kbit serial I2C bus EEPROM
but no 24512RP?
What did I do wrong?
Ken
Re: Main Board BN97-05375B EEPROM Reset Holes?
No idea what are you dooing. You found eeprom. You do short circuit and either you get success or not. If you have programmer, first you can make dump of this eeprom. Show dump here. I definitelly tell you is this dump of SoC eeprom or not.
To dump eeprom you can use cheap CH341A programmer or even arduino with network shield.
To dump eeprom you can use cheap CH341A programmer or even arduino with network shield.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Main Board BN97-05375B EEPROM Reset Holes?
juusso,
"No idea what are you dooing. You found eeprom. You do short circuit and either you get success or not."
1st I was trying to find the STMicroelectronics 24512RP ST8211k EEPROM Data Sheet but to date have Not found it. Do you know of any EEPROM Databases that have this information?
2nd Would like to do a short circuit! Please tell how!!!
Thanks!!!
Ken
"No idea what are you dooing. You found eeprom. You do short circuit and either you get success or not."
1st I was trying to find the STMicroelectronics 24512RP ST8211k EEPROM Data Sheet but to date have Not found it. Do you know of any EEPROM Databases that have this information?
2nd Would like to do a short circuit! Please tell how!!!
Thanks!!!
Ken
-
- Official SamyGO Developer
- Posts: 1051
- Joined: Sat Sep 21, 2013 5:07 pm
- Location: Poland
Re: Main Board BN97-05375B EEPROM Reset Holes?
You might use a paper clip 

sorry for my english
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
UE40F8000 (T-FXPDEUC-1136.0), BD-D5500
Re: Main Board BN97-05375B EEPROM Reset Holes?
Check wiki and you follow red or blue line. Use ANY example for ANY Tv.
All eeprom chips have same pinout. At least all atmel based eeprom chips so far i know until now. Use your ic904 ad use paperclip to connect two legs of chip.
All eeprom chips have same pinout. At least all atmel based eeprom chips so far i know until now. Use your ic904 ad use paperclip to connect two legs of chip.

LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE